[c-nsp] Sup2 bus utilization

[Paul]

IIRC, show catalyst6000 traffic-meter


On 9/20/2016 4:15 PM, Yang Yu wrote:
> Hi All,
>
> What IOS command is available for bus utilization on Sup2 (not 2T,
> unfortunately)?
>
> These are not available
> `show platform hardware capacity fabric`
> `show fabric`
>
> Is there any bus QoS available to prevent things from exploding when
> the bus gets saturated? IOS on both RP and SP.
>
> Thanks.
>
>
> Yang
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>