[c-nsp] 3rd party dwdm 80km optics in asr 9001

[Curtis Piehler]

I am rather shocked this doesn't work.   I'm not sure about the 9001
however we use varies MPAs for the 9006/9010 with third party dwdm xfp/sfp+
no issues.

On Sep 28, 2016 6:42 AM, "Gustav Ulander" <gustav.ulander at telecomputing.se>
wrote:

> Hello.
>
> Iam woundering if anyone has had issues running 3rd party optics in the
> built in optics ports of a ASR9001 .
> We have some 80km DWDM optics that we get module is not supported for.
> We tried with transceiver permit pid all. We have similar SR-MM modules
> installed in the same machine that is working as advertised.
> Iam beginning to wounder if the ASR 9001 is more sensitive with the
> longrange optics?
> We have been using the same optics in a couple of 6500 SUP2t with X2
> converters without issues but we cant seem to be bale to get a link on the
> ASR9001.
> We are running 5.3.3 on these routers which might be an issue also we
> haven't tried downgrade them to something earlier.
> Perhaps others has had the same issue?
>
> //Gustav
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>