[c-nsp] Diagnostics Untested

[Mohammad Khalil]

Hi all

I have Cisco 3650 switch with Denali 16.03.03 software version , am trying to run diagnostics tests (all , memory , PoE) but in the output result I can see the code U which refers to Untested

diagnostic start switch 1 test all (which caused the switch to reload)

switch 1:   SerialNo : FDO2021E126

  Overall Diagnostic Result for switch 1 : PASS
  Diagnostic level at card bootup: minimal

  Test results: (. = Pass, F = Fail, U = Untested)

  ___________________________________________________________________________

    1) DiagGoldPktTest:

   Port  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
   ----------------------------------------------------------------------------
         U  U  U  U  U  U  U  U  U  U  U  U  U  U  U  U  U  U  U  U  U  U  U  U

   Port 25 26 27 28
   ----------------
         U  U  U  U


          Error code ------------------> 3 (DIAG_SKIPPED)
          Total run count -------------> 0
          Last test testing type ------> n/a
          Last test execution time ----> n/a
          First test failure time -----> n/a
          Last test failure time ------> n/a
          Last test pass time ---------> n/a
          Total failure count ---------> 0
          Consecutive failure count ---> 0
  ___________________________________________________________________________

    2) DiagThermalTest -----------------> .

          Error code ------------------> 0 (DIAG_SUCCESS)
          Total run count -------------> 53
          Last test testing type ------> Health Monitoring
          Last test execution time ----> Apr 16 2017 13:10:21
          First test failure time -----> n/a
          Last test failure time ------> n/a
          Last test pass time ---------> Apr 16 2017 13:10:21
          Total failure count ---------> 0
          Consecutive failure count ---> 0
  ___________________________________________________________________________

    3) DiagFanTest ---------------------> .

          Error code ------------------> 0 (DIAG_SUCCESS)
          Total run count -------------> 53
          Last test testing type ------> Health Monitoring
          Last test execution time ----> Apr 16 2017 13:10:21
          First test failure time -----> n/a
          Last test failure time ------> n/a
          Last test pass time ---------> Apr 16 2017 13:10:21
          Total failure count ---------> 0
          Consecutive failure count ---> 0
  ___________________________________________________________________________

    4) DiagPhyLoopbackTest:

   Port  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24
   ----------------------------------------------------------------------------
         U  U  U  U  U  U  U  U  U  U  U  U  U  U  U  U  U  U  U  U  U  U  U  U

   Port 25 26 27 28
   ----------------
         U  U  U  U


          Error code ------------------> 3 (DIAG_SKIPPED)
          Total run count -------------> 0
          Last test testing type ------> n/a
          Last test execution time ----> n/a
          First test failure time -----> n/a
          Last test failure time ------> n/a
          Last test pass time ---------> n/a
          Total failure count ---------> 0
          Consecutive failure count ---> 0
  ___________________________________________________________________________

    5) DiagScratchRegisterTest ---------> .

          Error code ------------------> 0 (DIAG_SUCCESS)
          Total run count -------------> 53
          Last test testing type ------> Health Monitoring
          Last test execution time ----> Apr 16 2017 13:10:25
          First test failure time -----> n/a
          Last test failure time ------> n/a
          Last test pass time ---------> Apr 16 2017 13:10:25
          Total failure count ---------> 0
          Consecutive failure count ---> 0
  ___________________________________________________________________________

    6) DiagPoETest ---------------------> U

          Error code ------------------> 3 (DIAG_SKIPPED)
          Total run count -------------> 0
          Last test testing type ------> n/a
          Last test execution time ----> n/a
          First test failure time -----> n/a
          Last test failure time ------> n/a
          Last test pass time ---------> n/a
          Total failure count ---------> 0
          Consecutive failure count ---> 0
  ___________________________________________________________________________

    7) DiagStackCableTest --------------> U

          Error code ------------------> 3 (DIAG_SKIPPED)
          Total run count -------------> 0
          Last test testing type ------> n/a
          Last test execution time ----> n/a
          First test failure time -----> n/a
          Last test failure time ------> n/a
          Last test pass time ---------> n/a
          Total failure count ---------> 0
          Consecutive failure count ---> 0
  ___________________________________________________________________________

    8) DiagMemoryTest ------------------> U

          Error code ------------------> 3 (DIAG_SKIPPED)
          Total run count -------------> 0
          Last test testing type ------> n/a
          Last test execution time ----> n/a
          First test failure time -----> n/a
          Last test failure time ------> n/a
          Last test pass time ---------> n/a
          Total failure count ---------> 0
          Consecutive failure count ---> 0
  ___________________________________________________________________________


Am concerned mainly about DiagMemory and DiagPoE , tried to run the test as per code (6 and 8) and the same applies , am i missing something?

BR,

Mohammad