[c-nsp] ASR 1k vs 9k as a non-transit BGP router with full tables?

[Mark Tinka]

On 2/Aug/17 19:07, quinn snyder wrote:

> as a point of correction — iirc — asr1002x is running closer to an rp2.  i don’t have one available to me at the moment, but i believe the code indicates as such.  comparing the ram, route, etc numbers leads me to believe this is true.
>
> based on what i’m reading — the asr1002hx is closer to an rp3-based platform, again — comparing the numbers.  i could be wrong on this.

I could get into it, but hopefully this helps:

   
http://www.cisco.com/c/en/us/products/collateral/routers/asr-1000-series-aggregation-services-routers/data_sheet_c78-441072.html

Mark.