[c-nsp] FIB insertion issues on Sup2T routers

["Rolf Hanßen"]

Hello,

had a "chance" today to check this.

Interesting ist that the ressources are even lower than normal (approx.
100k IPv4 routes less)

L3 Forwarding Resources
             FIB TCAM usage:                     Total        Used      
%Used
                  72 bits (IPv4, MPLS, EoM)     1048576      557541       
 53%
                 144 bits (IP mcast, IPv6)      524288       45727        
 9%
                 288 bits (IPv6 mcast)          262144           1        
 1%

                     detail:      Protocol                    Used      
%Used
                                  IPv4                      557539        
53%
                                  MPLS                           1        
 1%
                                  EoM                            1        
 1%

                                  IPv6                       45724        
 9%
                                  IPv4 mcast                     3        
 1%
                                  IPv6 mcast                     1        
 1%

            Adjacency usage:                     Total        Used      
%Used
                                               1048576       32191        
 3%

kind regards
Rolf

> Hello,
>
> I think a full 'show platform hardware capacity' output from the affected
> device before reboot could be the best starting point for
> troubleshooting...
>
> You may use a EEM TCL script for autosaving useful outputs in case of such
> events.
> --
> Best regards,
> Vladimir Troitskiy