[c-nsp] NCS-5501 & 5502 Experiences?

[Gustav Ulander]

Hello Saku. 
Interesting, granted we haven’t played around that much with it and its abit troubling if it actually dosent work. 
Where you able to enter the configuration when you were evaluating it? We are running 6.1.2.
We are able to enter the configuration and were also able to show lpts and se counters go up. It would be interesting to know how far you got? 

RP/0/RP0/CPU0:cr03(config)#lpts pifib hardware police ?
  acl       pre-ifib acl name
  flow      lpts flow type
  location  Location Specification
  <cr>
RP/0/RP0/CPU0:cr03(config)#lpts pifib hardware police
RP/0/RP0/CPU0:cr03(config-pifib-policer-global)#commit
Fri Feb  3 23:53:42.671 UTC

Also counters are going up when doing show lpts. 

RP/0/RP0/CPU0:cr03#sh lpts pifib hardware police
Fri Feb  3 23:55:03.863 UTC
-------------------------------------------------------------
                Node 0/RP0/CPU0:
-------------------------------------------------------------
 Burst = 100ms for all flow types
-------------------------------------------------------------
FlowType               Policer Type    Cur. Rate  Def. Rate  Accepted             Dropped              TOS Value
---------------------- ------- ------- ---------- ---------- -------------------- -------------------- ----------
unconfigured-default   0       Static  2500       2500       0                    0                    01234567
L2TPv2-fragment        85      Static  10000      10000      0                    0                    01234567
Fragment               1       Static  1000       1000       0                    0                    01234567
OSPF-mc-known          2       Static  2000       2000       0                    0                    01234567
OSPF-mc-default        3       Static  1500       1500       0                    0                    01234567
OSPF-uc-known          4       Static  2000       2000       0                    0                    01234567
OSPF-uc-default        5       Static  1000       1000       0                    0                    01234567
ISIS-known             43      Static  2000       2000       2084616              0                    01234567
ISIS-default           44      Static  1500       1500       2084616              0                    01234567
BFD-known              50      Static  9600       9600       0                    0                    01234567
BFD-default            60      Static  9600       9600       0                    0                    01234567

//Gustav

-----Ursprungligt meddelande-----
Från: Saku Ytti [mailto:saku at ytti.fi] 
Skickat: den 3 februari 2017 20:01
Till: Gustav Ulander <gustav.ulander at telecomputing.se>
Kopia: Adrian Minta <adrian.minta at gmail.com>; cisco-nsp at puck.nether.net
Ämne: Re: [c-nsp] NCS-5501 & 5502 Experiences?

On 3 February 2017 at 17:36, Gustav Ulander <gustav.ulander at telecomputing.se> wrote:

> As far as we have been able to verify the copp policy seems to be working in the same manner.

This does not match our testing nor information we've received from Cisco. To my best of knowledge platform should not support LPTS yet.

--
  ++ytti