[c-nsp] Cat 6500: WS-X6748-SFP and VSS?

[Patrick M. Hausen]

Hi all,


> Am 16.01.2017 um 15:36 schrieb Patrick M. Hausen <hausen at punkt.de>:
> In the release notes for IOS 15.1SY I found this remark about
> supported Gigabit Ethernet modules:
> 
> WS-X6748-SFP 
> with WS-F6700-DFC3CXL , WS-F6700-DFC3C , WS-F6700-DFC3BXL (not supported in virtual switch mode)

Sorry, I have to rephrase my question after a second look:

----------------
WS-X6748-SFP 
(with WS-F6700-DFC3CXL , WS-F6700-DFC3C , 
WS-F6700-DFC3BXL (not supported in virtual switch mode)
WS-F6700-DFC3B (not supported in virtual switch mode)
or WS-F6700-CFC )
----------------

So I think this reads as:

WS-X6748-SFP with DFC-3CXL or DFC3C	supported
with DFC3BXL or DFC3B				supported, but no VSS

Am I reading this correctly? I yes, I have a different problem alltogether.

I upgraded two of our core switches from Sup720-3BXL to Sup720-10GE
with PFC-3CXL, then upgraded all the DFCs on the line cards and installed
IOS 15.1(2)SY9.

None of the copper Gigabit interfaces work. All show "down, line protocol is
down (notconnect)" regardless of the connection.

Any ideas on how to proceed from here?

BTW: this includes Gi1/1/3 and Gi2/1/3 - the copper interfaces in the supervisor
engines. Not only on the 6748 linecards.

Thanks
Patrick
-- 
punkt.de GmbH * Kaiserallee 13a * 76133 Karlsruhe
Tel. 0721 9109 0 * Fax 0721 9109 100
info at punkt.de       http://www.punkt.de
Gf: Jürgen Egeling      AG Mannheim 108285