[c-nsp] Remote BGP Gateway

[Mark Tinka]

On 21/Jul/17 15:20, Samir Abid Al-mahdi via cisco-nsp wrote:

> Dears Experts,
>
> We are an ISP that is leasing an international circuit of 2 10G to connect
> to level3 at Sofia-connect. The lease circuit is planned on two different
> physical routes to provide protection. Now we need to send a device over
> there to provide the following functionality:
>
> 1. Load balance between the two different 10G lease circuit, perhaps OSPF
> with the local router, or any other suggestion.
> 2. Establish multi-BGP sessions with the ISP ( Full bgp routing table ) and
> remote-peer sessions.
> 3. Should be able to provide HQOS functionality. The aim is that in the
> case of congestion, the routers will prioritize a set of IP address range
> and guarantee a certain percentage of the traffic.
> 4. To monitor the status of the lease circuit performance by O&M instances
> or any other tools with the help of the local router so that we can tell
> whether packet-loss/jetter is happening.
>
> Can you please suggest a router model, A Cisco vendor is preferred and what
> are the features that will perform this link performance monitoring.

A Cisco ASR1000 or ASR9001 should be small enough, and more than enough.

Mark.