[c-nsp] ASR 1001x for BGP

Ted Johansson ted.johansson at tele2.com
Wed Oct 4 16:00:34 EDT 2017

Hi Scott,

Why not look at the ASR9001(-S) instead or what are you looking for?

Best Regards
Ted Johansson

-----Original Message-----
From: cisco-nsp [mailto:cisco-nsp-bounces at puck.nether.net] On Behalf Of Scott Voll
Sent: den 4 oktober 2017 21:58
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] ASR 1001x for BGP

Need to order a BGP router asap...

Looking at an ASR 1001x.  Stock it comes with 8gb of ram.

is that enough for 2 full BGP feeds these days?  Both IPv4 and v6.  Netflow
/ AppX.....

Nothing else at this time.

or do I need to bump up the RAM?

Anything else I should know before pulling the trigger?

Thanks for your quick feedback.

cisco-nsp mailing list  cisco-nsp at puck.nether.net
archive at http://puck.nether.net/pipermail/cisco-nsp/

******** IMPORTANT NOTICE ********
The content of this e-mail is intended for the addressee(s) only and may contain information that is confidential and/or otherwise protected from disclosure. If you are not the intended recipient, please note that any copying, distribution or any other use or dissemination of the information contained in this e-mail (and its attachments) is strictly prohibited. If you have received this e-mail in error, kindly notify the sender immediately by replying to this e-mail and delete the e-mail and any copies thereof.

Tele2 AB (publ) and its subsidiaries (“Tele2 Group”) accepts no responsibility for the consequences of any viruses, corruption or other interference transmitted by e-mail.

More information about the cisco-nsp mailing list