[c-nsp] Juniper MX240 & MX480

[Misak Khachatryan]

Hi,

it is strange, because RE doesn't do much with line cards, maybe it
depends what kind SCB you have ...

Best regards,
Misak Khachatryan,
Network Administration and
Monitoring Department Manager,

GNC- ALFA CJSC
1 Khaghaghutyan str., Abovyan, 2201 Armenia
Tel: +374 60 46 99 70 (9670),
Mob.: +374 55 19 98 40
URL:    www.rtarmenia.am


On Fri, Oct 27, 2017 at 1:51 AM, "Rolf Hanßen" <nsp at rhanssen.de> wrote:
> Hello Aaron,
>
> that's not a Cisco-only "feature".
> You could also move from MX to new ASR boxes because Juniper told you that
> your old DPC cards do not work if you replace your RE-S-2000 with the
> newest RE (RE-S-X6-64G + SCBE2). ;)
>
> kind regards
> Rolf
>
>> The thing that caused me to evaluate replacing my ASR9k 15-node network
>> was
>> when Cisco told me if I replaced my RSP-4G routing engine with newest one,
>> all my 1st gen Trident linecards would stop working.  :|
>
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/