[c-nsp] config example xconnent between ASR9K and 6500

[Alejandro Aristizabal]

Thanks every one it works!!!


But my needing is a little different because in ASR subinterface 
(interface TenGigE0/0/0/1.103 l2transport of the example) when I want to 
configure it inside a bridge domian it says that is not possible,


I do it betwwen ASR and ASR and works well like this:


l2vpn
  bridge group BG_MST_VAL
   bridge-domain BD_MST-VAL-VLAN-147
    interface Bundle-Ether3.147
    !
    interface GigabitEthernet0/0/0/2.147
    !
    interface GigabitEthernet0/0/0/3.147
    !
    vfi EMAV
     neighbor 10.248.10.1 pw-id 147
     !
     neighbor 10.248.10.3 pw-id 147


¿¿¿How can I do the same between my cisco 6500 and ASR9K  ???

thank very much !!!




El 15/09/17 21:10, Aaron Gould escribió:
> interface TenGigE0/0/0/1.103 l2transport


--