[c-nsp] config example xconnent between ASR9K and 6500

[Alejandro Aristizabal]

Yes !!! it works !!! thank u very much

El 21/09/17 02:20, James Bensley escribió:
> On 20 September 2017 at 22:52, Alejandro Aristizabal
> <aaristizabal at mediacommerce.net.co> wrote:
>> how can I fix this issue ???
> As I said before...
>
>>> On 20/09/17 11:19, James Bensley wrote:
>>>
>>> You can try and move the neighbor statement from the VFI to under your
>>> bridge domain config, I believe that creates a targeted (p2p) LDP
>>> session which might "trick" the 6500 into thinking this is just a
>>> vanilla Martini draft pseudowire.
> So can you try and change you config from this ...
>
>   l2vpn
>    xconnect group PRUEBA
>     p2p ENSAYO
>      interface GigabitEthernet0/0/0/2.70
>      neighbor 172.31.171.254 pw-id 70
>
> To this..
>
>
>   l2vpn
>    !
>    no xconnect group PRUEBA
>    !
>    bridge group BG_MST_VALLE
>     bridge-domain BD_MST-VALLE-VLAN-70
>      interface GigabitEthernet0/0/0/2.70
>      neighbor 172.31.171.254 pw-id 70
>
>
> Cheers,
> James.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


--