[c-nsp] Nexus Config Sanity Check

[Mike Hammett]

We have a Nexus 3548 connected to Ethernet transport connected to a Mikrotik CCR on the far end. The CCR's configuration is fairly straight forward, but so is the Nexus. We have a native VLAN (200) and a tagged VLAN (778). We're not seeing each other over 778. 

Thoughts? 


Nexus# show run int eth 1/46 


!Command: show running-config interface Ethernet1/46 
!Time: Wed Jan 24 07:23:21 2018 


version 6.0(2)A6(3) 


interface Ethernet1/46 
description Customer: XXXX 
switchport mode trunk 
switchport trunk native vlan 200 
switchport trunk allowed vlan 200,778 
no cdp enable 
spanning-tree bpdufilter enable 
no shutdown 


Nexus# show mac address-table interface ethernet 1/46 
Legend: 
* - primary entry, G - Gateway MAC, (R) - Routed MAC, O - Overlay MAC 
age - seconds since first seen,+ - primary entry using vPC Peer-Link 
VLAN MAC Address Type age Secure NTFY Ports/SWID.SSID.LID 
---------+-----------------+--------+---------+------+----+------------------ 
* 200 d4ca.6d74.3eb2 dynamic 2270 F F Eth1/46 





----- 
Mike Hammett 
Intelligent Computing Solutions 

Midwest Internet Exchange 

The Brothers WISP