[c-nsp] Catalyst 4500 listening on TCP 6154 on all interfaces

Mon May 7 07:23:06 EDT 2018

I've tried to reset to default the config, shutdown all
interface, remove all L3 ip/feature (no ip blabla), and I still see by
default 2 TCP ports on listening state:

Cat4500-SUP7L-E#sh ip prot
*** IP Routing is NSF aware ***

Cat4500-SUP7L-E#
Cat4500-SUP7L-E#sh run | in ip
 address-family ipv4
 address-family ipv6
no ip routing
ip vrf Liin-vrf
no ip mfib
no ip bootp server
no ip dhcp-client broadcast-flag
no ip igmp snooping
no ipv6 traffic interface-statistics
 no ip address
 no ip route-cache
 no ip address
 no ip route-cache
no ip forward-protocol nd
no ip http server
no ip http secure-server
Cat4500-SUP7L-E#
Cat4500-SUP7L-E#
Cat4500-SUP7L-E#show tcp br all
TCB       Local Address               Foreign Address             (state)
5B40BB30  0.0.0.0.4786               *.*                         LISTEN
5CD5D2D8  0.0.0.0.6154               *.*                         LISTEN
Cat4500-SUP7L-E#

I will now try to negate all potential active service from the 'show run
all' config but it's not optimal as for example 'vstack' (port 4786)
does not appear in the default config so it would not be disable by this
trivial method.

One things which is not clear, could it be possible that this kind of tcp port is not registered by
Iana from Cisco because it meant to be used for internal communication only
(internal to the device), or should you register any port usage (even
'private') ?

TCP 6154 not officially registered:
https://www.iana.org/assignments/service-names-port-numbers/service-names-port-numbers.xhtml?search=6154

in contrary to the SMI (zero touch feature on tcp 4786) which is
registered since almost 10y:
https://www.iana.org/assignments/service-names-port-numbers/service-names-port-numbers.xhtml?search=4786

Fred

On 03.05.2018 06:52, frederic.jutzet at sig-telecom.net wrote:
> Hi,
>
> We have Cat 4500 series on SUP7L-E with IOS/XE 03.06.02.E/152(2).E2
> which have TCP port 6154 listening on all interfaces.
>
> Any idea what it could be ?
>
> #show tcp brief all
> TCB       Local Address               Foreign Address             (state)
> ...
> 5A529430  0.0.0.0.6154        <<<<<<<<<<<<<<<<
>
>
> #show tcp tcb 5A529430
> Connection state is LISTEN, I/O status: 1, unread input bytes: 0           
> Connection is ECN Disabled, Mininum incoming TTL 0, Outgoing TTL 255
> Local host: 0.0.0.0, Local port: 6154
> Foreign host: UNKNOWN, Foreign port: 0
> Connection tableid (VRF): 1
> Maximum output segment queue size: 50
>
> Enqueued packets for retransmit: 0, input: 0  mis-ordered: 0 (0 bytes)
>
> Event Timers (current time is 0xF58354):
> Timer          Starts    Wakeups            Next
> Retrans             0          0             0x0
> TimeWait            0          0             0x0
> AckHold             0          0             0x0
> SendWnd             0          0             0x0
> KeepAlive           0          0             0x0
> GiveUp              0          0             0x0
> PmtuAger            0          0             0x0
> DeadWait            0          0             0x0
> Linger              0          0             0x0
> ProcessQ            0          0             0x0
>
> iss:          0  snduna:          0  sndnxt:          0
> irs:          0  rcvnxt:          0
>
> sndwnd:      0  scale:      0  maxrcvwnd:   4128
> rcvwnd:   4128  scale:      0  delrcvwnd:      0
>
> SRTT: 0 ms, RTTO: 2000 ms, RTV: 2000 ms, KRTT: 0 ms
> minRTT: 60000 ms, maxRTT: 0 ms, ACK hold: 200 ms
> uptime: 0 ms, Sent idletime: 0 ms, Receive idletime: 0 ms
> Status Flags: gen tcbs
> Option Flags: VRF id set, keepalive running, nagle, Reuse local address
>   Retrans timeout
> IP Precedence value : 0
>
> Datagrams (max data segment is 516 bytes):
> Rcvd: 0 (out of order: 0), with data: 0, total data bytes: 0
> Sent: 0 (retransmit: 0, fastretransmit: 0, partialack: 0, Second
> Congestion: 0), with data: 0, total data bytes: 0
>
>  Packets received in fast path: 0, fast processed: 0, slow path: 0
>  fast lock acquisition failures: 0, slow path: 0
> TCP Semaphore      0x5BEB9B10  FREE
>
>
>
>
>
> (The command "show control-plane host open-ports" is not available on
> this platform/code)
>
>
>
> I also think that if it would be a local socket for internal process
> communication, it would be 127.0.0.1:6154 instead of 0.0.0.0:6154.
> So this is listening on all interfaces, virtuals and physicals and seam
> not to be for internal internal process communication.
>
>
> Fred
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/