[c-nsp] line con 0 as terminal server on Cat6500?

[joshd]

I'm 99.9999% positive there is no way to make an outbound connection from a
console port.  It's been a while since I've worked on that stuff though.


On Fri, May 18, 2018 at 2:04 AM, Patrick M. Hausen <hausen at punkt.de> wrote:

> Hi!
>
> > Am 18.05.2018 um 09:00 schrieb joshd <jduffek at gmail.com>:
> > If the good cat6500 had an aux port, you could go from aux->con of the
> bad switch....but I don't think cat6500s have an aux port.
>
> Precisely - the VS-S720-10G doesn't have an aux port.
> The question is if I can use the con port in the same fashion and
> if yes, how?
>
> Patrick
> --
> punkt.de GmbH                   Internet - Dienstleistungen - Beratung
> Kaiserallee 13a                 Tel.: 0721 9109-0 Fax: -100
> 76133 Karlsruhe                 info at punkt.de   http://punkt.de
> AG Mannheim 108285              Gf: Juergen Egeling
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>