[c-nsp] Debouce Timers

[Harry Hambi - Atos]

Hi all,
Talking to my colleague who informs me about some flapping links on devices connected FEX's ( Cisco Fabric Extenders). We are seeing this on a number of devices connected to the FEX's. A tac case was opened and cisco say it's not a hardware problem, and suggested increasing debounce timer from the default of 100ms to a 1000ms. This seems to have cleared log messages, but this is just masking the problem? Not a cure.  Has anyone experienced similar issues? Through part experience changing default timers can cause problems.

Harry Hambi BEng(Hons)  MIET  Rsgb




----------------------------

http://www.bbc.co.uk
This e-mail (and any attachments) is confidential and may contain personal views which are not the views of the BBC unless specifically stated.
If you have received it in error, please delete it from your system.
Do not use, copy or disclose the information in any way nor act in reliance on it and notify the sender immediately.
Please note that the BBC monitors e-mails sent or received.
Further communication will signify your consent to this.

---------------------