[c-nsp] 4500 chassis

[Jeremy Bresley]

The 4500R-E chassis went LDoS in April.  The 4500R+E chassis are not 
even announced for End of Sale yet, let alone LDoS.  The Sup8E is also 
not even announced for EOL yet.  The 7-E/7L-E were announced in Oct 
2016, and are still supported until Oct 2022.

Jeremy

On 11/9/2018 12:06, Harry Hambi - Atos wrote:
> Hi Zach,
> Thanks for your replay. IOS-XE 03.08.04E sup engine Sup 8-E . No option for entering  ip mfib fastdrop, all I get is ip mfib carriage return.
> Are you sure this chassis is EoS? I thought it was quite new.
> Harry Hambi BEng(Hons)  MIET  Rsgb
>
> -----Original Message-----
> From: Zach Puls [mailto:zpuls at ksfiber.net]
> Sent: 09 November 2018 16:53
> To: Harry Hambi - Atos
> Cc: cisco-nsp at puck.nether.net
> Subject: RE: 4500 chassis
>
> Harry,
>
> What Supervisor engine are you running, and what IOS/IOS-XE version? Also, what error are you getting when you enter "ip mfib fastdrop"?
>
> I don't know how much luck you're going to have with TAC, that chassis has been EoS since April of this year.
>
> Thanks,
>
> Zach Puls
> Network Engineer | MEF-CECP
> KsFiberNet
>
> -----Original Message-----
> From: cisco-nsp <cisco-nsp-bounces at puck.nether.net> On Behalf Of Harry Hambi - Atos
> Sent: Friday, November 09, 2018 06:28
> To: cisco-nsp at puck.nether.net
> Subject: [c-nsp] 4500 chassis
>
> Hi All,
> Trying to add the command:
>   IP mfib  fastdrop  to a  WS-C4510R+E 10 slot switch, this is to protect the CPU from non-RPF traffic, ie traffic that fails RFF checks. This command did work on older chassis, before I open a Tac case for this has anyone else experienced this issue?. Thanks in advance.
>
> Harry Hambi BEng(Hons)  MIET  Rsgb