[c-nsp] Has there been a Cisco network device with GE management port while other ports are FE or lower?

[Nick Cutting]

Hmm I seem to remember on some older version of the CSR code (cloud services router) they had a G0 interface.

Also - the only other place you might see it is on a 8xx series router.

-----Original Message-----
From: cisco-nsp <cisco-nsp-bounces at puck.nether.net> On Behalf Of Martin T
Sent: Wednesday, October 24, 2018 12:27 PM
To: cisco-nsp at puck.nether.net
Subject: [c-nsp] Has there been a Cisco network device with GE management port while other ports are FE or lower?

This message originates from outside of your organisation.

Hi,

I need to know, if GigabitEthernet0(returned by SNMP ifDescr)/Gi0(returned by ifName) is a Management Ethernet interface or not. My assumption is that Cisco has never made a network device, where Management Ethernet is a 1GigE port while non-management port(s) are Ethernet or Fast Ethernet ports. In other words, if device has any other Gi ports besides GigabitEthernet0, then GigabitEthernet0 is always a Management Ethernet port?


thanks,
Martin
_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http://puck.nether.net/pipermail/cisco-nsp/