[c-nsp] 3750 stacks

[Nathan Lannine]

You should read this:
https://www.cisco.com/c/en/us/support/docs/switches/catalyst-3750-series-switches/71925-cat3750-create-switch-stks.html#anc13.
Once the switch is fully compatible with the stack and joined, you should
be able to copy the image over, but I feel this likely does not meet your
need.  The provided link should be helpful.

- Nathan

On Thu, Sep 13, 2018 at 7:48 AM Harry Hambi - Atos <harry.hambi at bbc.co.uk>
wrote:

> Hi List,
> If I introduce a new member switch to a stack, switch it on, can I then
> copy an IOS image from an existing members flash to the new stack member?
> Any information appreciated.
>
> Harry Hambi BEng(Hons)  MIET  Rsgb
>
>
>
>
> ----------------------------
>
> http://www.bbc.co.uk
> This e-mail (and any attachments) is confidential and may contain personal
> views which are not the views of the BBC unless specifically stated.
> If you have received it in error, please delete it from your system.
> Do not use, copy or disclose the information in any way nor act in
> reliance on it and notify the sender immediately.
> Please note that the BBC monitors e-mails sent or received.
> Further communication will signify your consent to this.
>
> ---------------------
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>