[c-nsp] ASR9900 - Copy files from USB key

[Peter Bruno]

If you do a "dir ?" it should show you the possabilities... often "usb0:".
The size of the usb stick matters sometimes.  Try a small < 8G stick.

Peter

On Wed, May 15, 2019 at 1:36 PM Bryan Holloway <bryan at shout.net> wrote:

>
> On 5/15/19 4:53 AM, Erik Sundberg wrote:
> > Has anyone been able to install\copy software images from a USB key to a
> ASR9906. It take for ever to copy files from a http server, I would like to
> try from a USB key to see if it's faster.
> >
> > The router never recognizes the usb key when it put into the rsp. The
> Cisco Linux (Admin VM) also does not recognize it either.
> >
> > I am specifically running a Cisco ASR9906 with A99-RSP-SE 6.3.3
> (32-bit). I am Upgrading to 6.3.3 64-bit then to 6.5.3 (64 bit) the current
> process take 3-4 hours.
> >
> >
> > Thanks
> >
> > Erik
>
>
> I've definitely copied files from a USB stick onto an ASR9001, so I
> can't imagine why you wouldn't be able to on a 990x platform. Pretty
> sure I did it on a 9006 with RP880s, but it's been awhile.
>
> The trick is usually figuring out the correct device name. In my travels
> I've seen "usb:", "disk2:" ... ymmv.
>
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>


-- 
Thank you,

Peter Bruno
609.335.6887 c