[c-nsp] MPLS xconnect with a WS-C3850 switch?

[Scott Miller]

Doesn't necessarily need to be the loopback, but whatever IP is configured
as the MPLS LDP ROUTER-ID.

It's just that most of us use the loopback for the MPLS LDP ROUTER-ID.



On Thu, Nov 7, 2019 at 2:50 PM Mark Tinka <mark.tinka at seacom.mu> wrote:

>
>
> On 7/Nov/19 18:37, Shawn L wrote:
> > A-ha.  Gave both routers loopback ip addresses and configured the
> xconnect
> > to use them, and it came right up.
> >
> > It's interesting that it wouldn't work with addresses on the physical
> > interfaces.  In any event, it's working now.  Thanks!
>
> I'm surprised an Enterprise Catalyst switch can run MPLS :-).
>
> But more importantly, I don't remember ever setting up pw's on physical
> interface IP addresses... always toward the Loopback.
>
> Mark.
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>