[c-nsp] ARP requests

[Eugene Grosbein]

19.08.2020 21:44, Gert Doering wrote:
> Moin,
> 
> On Wed, Aug 19, 2020 at 09:40:43PM +0700, Eugene Grosbein wrote:
>> Gi3/9 of the switch is actually the port connected to router's Gi0/1.
>> So, the question remains same.
> 
> Check the routes on the router.  If you have something which is pointing
> directly to an interface ("ip route 0.0.0.0 0.0.0.0 gi0/1") it will
> generate proxy-ARP requests for all destinations covered by that route.
> 
> Always use interface + gateway-IP unless this is a desired property.

I have not such routes: the command "show ip route | include 0/1$" shows nothing.
The interface Gi0/1 does not have any IP configuration itself, only its sub-interfaces have.