[c-nsp] Cisco N540-ACC-SYS ipv4 routes

[Mark Tinka]

On 9/Jul/20 03:34, Vikas Sharma wrote:
> Dear Luka,
>
> Thanks for your revert. I have checked all ciscolive presentation before I
> have shooted question to the forum. I understand, LPM and LEM along with
> iTCAM support on C 540 does not exceed 400k but I was not getting details
> on rib/fib on ASR 1002-HX, in case you have found, please share with me.
>
> Also, processing power of ASR vs C 540 is very different, one with quard
> core 1.2 GHz and another with 2.5 GHz, so I  was also wondering if BGP
> scanner process will be good with which. If 540 can take care of scanning
> process!!
>
> Also internet does not inform about table-map (atleast, I couldn't find),
> on C 540, many thanks to Jason for details provided.

Also, the ASR1000 is IOS XE, while the NCS540 is IOS XR.

Mark.