[c-nsp] ASR9001 and Snmp

[Bryan Holloway]

Have you updated your 'control-plane' config to allow SNMP from your 
sources?


On 11/9/20 9:18 AM, Olivier CALVANO wrote:
> Hi
> 
> I can't get the snmp to work on my cisco ASR9000 to monitor it with
> Centreon.
> 
> i use this configuration:
> 
> snmp-server ifindex persist
> snmp-server trap-source Loopback0
> 
> snmp-server view public system included
> snmp-server community public view public ro admin-nets
> 
> snmp-server group SnmpAdmins v3 auth ipv4 admin-nets
> snmp-server user admin SnmpAdmins v3 auth md5 **PASSWORD
> 
> ipv4 access-list admin-nets
>   permit ipv4 172.20.18.0/28 any
>   ...
> 
> when I run the check requests on my centreon, in snmp v3 with login / pass
> I always have a "no answer"
> 
> I did not find an example configuration in version 2c
> 
> a idea ?
> 
> thanks for your help
> olivier
> _______________________________________________
> cisco-nsp mailing list  cisco-nsp at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-nsp
> archive at http://puck.nether.net/pipermail/cisco-nsp/
>