[c-nsp] Question about 9410R interface naming

[Nick Cutting]

Nexus has it right - everything is "E"


From: cisco-nsp <cisco-nsp-bounces at puck.nether.net> On Behalf Of aaron1 at gvtc.com
Sent: Thursday, September 10, 2020 5:58 PM
To: 'Nick Hilliard' <nick at foobar.org>
Cc: cisco-nsp at puck.nether.net
Subject: Re: [c-nsp] Question about 9410R interface naming

This message originates from outside of your organisation.

Juniper was good with port id's until the MX204 :)

Now XE doesn't always mean 10 gig

set interfaces xe-0/1/4 gigether-options speed 1g

agould at dallas-204-1> show interfaces xe-0/1/4 | grep speed
Link-level type: Flexible-Ethernet, MTU: 9216, MRU: 9224, LAN-PHY mode, Speed: 10Gbps, BPDU Error: None,
Speed Configuration: 1G

-aaron


_______________________________________________
cisco-nsp mailing list cisco-nsp at puck.nether.net<mailto:cisco-nsp at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-nsp<https://protect-eu.mimecast.com/s/j-_eCzmZNsRQxEHgvzZs?domain=puck.nether.net>
archive at http://puck.nether.net/pipermail/cisco-nsp/<https://protect-eu.mimecast.com/s/oxvvCAn47H9LnBfYRor0?domain=puck.nether.net>