[c-nsp] asr920 - pppoe - Filter-Id is fail

[Mike]

Hi,

    I got another one -

    Playing with my asr920 I have it working as a pppoe server. I notice
that if I have a radius attribute returned "Filter-Id" with the name of
a filter already on the box, the pppoe session doesn't come up and
throws an error:

Sep 18 12:11:13.636 PDT: RADIUS: Received from id 1645/45
100.127.248.10:1812, Access-Accept, len 119
Sep 18 12:11:13.637 PDT: RADIUS:  authenticator FC CA B3 DE 64 4C C6 81
- 1E B3 E3 2F 6F 91 E0 78
Sep 18 12:11:13.637 PDT: RADIUS:  Framed-Protocol     [7]   6  
PPP                       [1]
Sep 18 12:11:13.637 PDT: RADIUS:  Framed-Compression  [13]  6   VJ
TCP/IP Header Compressi[1]
Sep 18 12:11:13.637 PDT: RADIUS:  Framed-IP-Address   [8]   6  
100.127.248.222          
Sep 18 12:11:13.637 PDT: RADIUS:  Vendor, Cisco       [26]  58 
Sep 18 12:11:13.637 PDT: RADIUS:   ssg-service-info   [251] 52 
"QU;4500000;843750;1687500;D;4500000;843750;1687500"
Sep 18 12:11:13.637 PDT: RADIUS:  Filter-Id           [11]  23 
Sep 18 12:11:13.637 PDT: RADIUS:   63 75 73 74 6F 6D 65 72 5F 69 6E 62
6F 75 6E 64  [customer_inbound]
Sep 18 12:11:13.637 PDT: RADIUS:   31 2E 6F 75 74             [ 1.out]
Sep 18 12:11:13.637 PDT: RADIUS(0000003F): Received from id 1645/45
Sep 18 12:11:13.638 PDT: %SGPM-3-POLICY_RULE_SERVICE_CONFIG_ERROR:
Service () is configured incorrectly, service_failed event will be thrown

if I remove the Filter-Id, this error goes away. the referenced filter
(access-list) does exist. Not sure what the issue here is. Anyone know?