[c-nsp] asr920 - pppoe - Filter-Id is fail

[Mike]

On 9/19/20 4:16 AM, Chris Jones wrote:
> Does it work any better if you use
>
> Cisco-AVPairs = “ip:inacl=MY_ACL”
>

Unfortunately, no it does not. I have verified I have a matching acl
name, it just doesn't seem to want to fly. The only sss message I see
just says:

"Subscriber service profile has invalid configuration"


I use this exact technique on asr1000 and c7201 and it works there. I am
just wondering if maybe there is some other missing config that enables
per-user acls on the asr920 that is preventing this from flying.