[c-nsp] NXOS 7 apply VTY access-list to both IPv4 and IPv6

[Drew Weaver]

Nevermind I actually figured this out. I had created the V6 ACL as a V4 ACL.

Apologies for the bytes.

-----Original Message-----
From: cisco-nsp <cisco-nsp-bounces at puck.nether.net> On Behalf Of Drew Weaver
Sent: Wednesday, January 13, 2021 12:01 PM
To: 'cisco-nsp at puck.nether.net' <cisco-nsp at puck.nether.net>
Subject: [c-nsp] NXOS 7 apply VTY access-list to both IPv4 and IPv6

Hello,

I am doing basic configuration on a switch with NXOS 7. It seems to not want to let me specify different ACLs per "address family" even though it seems to imply that it should be possible. If I enter the command as "ip access-class V4ACL in" and then try to enter "ipv6 access-class V6ACL in" it says: ACL with given name exists with different type

It is not a huge deal because CoPP filters it first, but I would like to do it for the sake of paranoia and consistency.

It doesn't seem to be possible to create an ACL that is both IPv4 and IPv6 on this platform, so I am not entirely certain how you do this.

Thanks,
-Drew

_______________________________________________
cisco-nsp mailing list  cisco-nsp at puck.nether.net https://urldefense.proofpoint.com/v2/url?u=https-3A__puck.nether.net_mailman_listinfo_cisco-2Dnsp&d=DwICAg&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=OPufM5oSy-PFpzfoijO_w76wskMALE1o4LtA3tMGmuw&m=_0xdyUFzHei0BVlt5FeNWn1NB6M1VAlq8UquBTATmY8&s=zdo83IO7gCmeeQPmDv_zrwEhIS5FRVbvUttgzMeSEkg&e=
archive at https://urldefense.proofpoint.com/v2/url?u=http-3A__puck.nether.net_pipermail_cisco-2Dnsp_&d=DwICAg&c=euGZstcaTDllvimEN8b7jXrwqOf-v5A_CdpgnVfiiMM&r=OPufM5oSy-PFpzfoijO_w76wskMALE1o4LtA3tMGmuw&m=_0xdyUFzHei0BVlt5FeNWn1NB6M1VAlq8UquBTATmY8&s=HavN1jnpsgGQa4V-PZQAKKapytaGyR47SsWz81CBTsg&e=