[c-nsp] Pnet XRV 6.6.2

Mohammad Khalil eng_mssk at hotmail.com
Wed Dec 27 15:11:40 EST 2023

It was interface mapping issue , G0/0/0/0 is actually G0/0/0/2
Thanks everyone.
From: cisco-nsp <cisco-nsp-bounces at puck.nether.net> on behalf of Mohammad Khalil via cisco-nsp <cisco-nsp at puck.nether.net>
Sent: Wednesday, December 27, 2023 3:42 PM
To: cisco-nsp at puck.nether.net <cisco-nsp at puck.nether.net>
Subject: [c-nsp] Pnet XRV 6.6.2

I have uploaded image xrv 6.2.2 on pnet for a lab environment and the image booted successfuly.
However , I am not able to ping any connected neighbor on any interface though all interfaces are up/up.
Interface                      IP-Address      Status          Protocol Vrf-Name
Loopback0                  Up              Up       default
MgmtEth0/0/CPU0/0              unassigned      Shutdown        Down     default
GigabitEthernet0/0/0/0       Up              Up       default
GigabitEthernet0/0/0/1       Up              Up       default
GigabitEthernet0/0/0/2       Up              Up       default
GigabitEthernet0/0/0/3         unassigned      Shutdown        Down     default
GigabitEthernet0/0/0/4         unassigned      Shutdown        Down     default
GigabitEthernet0/0/0/5         unassigned      Shutdown        Down     default
Is there anything I should do to resolve this?

cisco-nsp mailing list  cisco-nsp at puck.nether.net
archive at http://puck.nether.net/pipermail/cisco-nsp/

More information about the cisco-nsp mailing list