[c-nsp] BGP routes disappearing
Hank Nussbacher
hank at interall.co.il
Mon Jun 10 04:33:21 EDT 2024
On 10/06/2024 11:05, Hank Nussbacher wrote:
Ignore. There was an ACL on GigabitEthernet0/0/0/43.1 that blocked the
traffic.
Nothing like solving your own issues.
-Hank
> I have a simple iBGP peer defined as follows:
>
> neighbor 128.139.197.146
> remote-as 378
> update-source Loopback0
> address-family ipv4 unicast
>
>
> I have a GigE interface defined as:
>
> interface GigabitEthernet0/0/0/43.1
> ipv4 address 192.0.2.1 255.255.255.0
> encapsulation dot1q 1
>
> This iBGP peer feeds me /32s with nexthop set as 192.0.2.1/32. Problem
> is all routes disappear.
>
> Neighbor Spk AS MsgRcvd MsgSent TblVer InQ OutQ Up/Down
> St/PfxRcd
> 128.139.197.146 0 378 10437 627880 10060119 0 0
> 00:15:41 0
>
>
> If the feed sets the IP to 192.0.2.2 then the BGP routes appear in the
> routing table. If I then change the IP address on interface
> GigabitEthernet0/0/0/43.1 to 192.0.2.2 then the routes disappear as
> well after having made it into the routing table.
>
>
> I am obviously missing something very simple. Clue-bat welcome.
>
>
> Thanks,
>
> Hank
>
>
>
More information about the cisco-nsp
mailing list