*** System received a Bus Error exception *** signal= 0xa, code= 0x1c, context= 0x6101b6b4 PC = 0x60688fe4, SP = 0x61074c30, RA = 0x60688fe4 Cause Reg = 0x0000401c, Status Reg = 0x34008003 System Bootstrap, Version 12.2(8r)B, RELEASE SOFTWARE (fc1) TAC Support: http://www.cisco.com/tac Copyright (c) 2002 by cisco Systems, Inc. System Bootstrap, Version 12.2(8r)B, RELEASE SOFTWARE (fc1) TAC Support: http://www.cisco.com/tac Copyright (c) 2002 by cisco Systems, Inc. C7200 platform with 1048576 Kbytes of main memory Self decompressing the image : ###################################################################### [OK] Self decompressing the image : #################################################################################################################################################################################################################################################################################################################### [OK] Restricted Rights Legend Use, duplication, or disclosure by the Government is subject to restrictions as set forth in subparagraph (c) of the Commercial Computer Software - Restricted Rights clause at FAR sec. 52.227-19 and subparagraph (c) (1) (ii) of the Rights in Technical Data and Computer Software clause at DFARS sec. 252.227-7013. cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Cisco IOS Software, 7200 Software (C7200-SPSERVICESK9-M), Version 12.2(33)SRC4, RELEASE SOFTWARE (fc2) Technical Support: http://www.cisco.com/techsupport Copyright (c) 1986-2009 by Cisco Systems, Inc. Compiled Mon 11-May-09 16:53 by prod_rel_team Image text-base: 0x60009304, data-base: 0x627635B0 Cache error detected! CP0_CAUSE (reg 13/0): 0x00004000 CPO_ECC (reg 26/0): 0x40000000 Data cache error CPO_BUSERRDPA (reg 26/1): 0xFBBFFFE0 CPO_CACHERI (reg 27/0): 0x30000C80 Tag address parity error Data array parity error Instruct cache index 0x00000064 CPO_CACHERD (reg 27/1): 0x840000C0 Multiple data cache errors External cache error Data cache index 0x00000006 CPO_CCHEDPA (reg 27/3): 0x00020000 : Interrupt exception, CPU signal 20, PC = 0xA0000100 -------------------------------------------------------------------- Possible software fault. Upon recurrence, please collect crashinfo, "show tech" and contact Cisco Technical Support. -------------------------------------------------------------------- -Traceback= 61D8ECCC 61D7D644 60258534 61DAB96C 6018B05C 6018B2B8 6018DC08 60E3D1C8 60E3D524 61D67230 61D6721C $0 : 00000000, AT : 63F50000, v0 : 1028F4D2, v1 : 0FFFFFD0 a0 : 50003CB4, a1 : 07FFDF88, a2 : 00020002, a3 : 63F724E0 t0 : 63D70000, t1 : 63F72390, t2 : 3400C100, t3 : FFFF00FF t4 : 6069D058, t5 : 6500B6D8, t6 : 6500B6D4, t7 : 6500B6D0 s0 : 500040C0, s1 : 07FFE18E, s2 : 07FFDF88, s3 : 63F705A8 s4 : 63F700C8, s5 : 00000000, s6 : 000001EE, s7 : 63D70000 t8 : 6460B9F0, t9 : 00000000, k0 : 3040D001, k1 : 00000000 gp : 63F59518, sp : 646110E0, s8 : 0000000E, ra : 61D8E9A8 EPC : 61D8ECCC, ErrorEPC : A0000100, SREG : 3400C107 MDLO : 0037F040, MDHI : 00000000, BadVaddr : 00000008 DATA_START : 0x627635B0 Cause 00004000 (Code 0x0): Interrupt exception === Flushing messages () === Buffered messages: Queued messages: No warm reboot Storage *** System received a Cache Parity Exception *** signal= 0x14, code= 0x30000c80, context= 0x64287524 PC = 0xa0000100, SP = 0x646110e0, RA = 0x61d8e9a8 Cause Reg = 0x00004000, Status Reg = 0x3400c107 System Bootstrap, Version 12.2(8r)B, RELEASE SOFTWARE (fc1) TAC Support: http://www.cisco.com/tac Copyright (c) 2002 by cisco Systems, Inc. C7200 platform with 1048576 Kbytes of main memory self decompressing the image : ###################################################################### [OK] Uncorrectable ECC/Parity Error Bus Error Status Reg = 0000000081DC0000 Transfer ID = 0x0000 Responder ID = MC Error Code = Uncorrectable ECC Error in Data Multiple Errors = No ZBbus bits 255:192 = 4E6F726D616CC000 ZBbus bits 191:128 = 0005000060F4C880 ZBbus bits 127:64 = 0000004E00400008 ZBbus bits 63:0 = 0000000000000000 System Revision = 8F6F202512500BFF L2 Read Tag = 0003DD000105FFE0 L2 ECC Tag = 0026DC0090004900 L2 ECC Counter = 0000000000000000 Memory and IO Err Counter = 0000000000000100 Bus Watcher register dump cor_l2cache_data_ecc_count = 0 bad_l2cache_data_ecc_count = 0 cor_l2cache_tag_ecc_count = 0 bad_l2cache_tag_ecc_count = 0 cor_memory_data_ecc_count = 0 bad_memory_data_ecc_count = 1 bus_errors = 0 %ERR-1-FATAL: Fatal error interrupt, No reloading err_stat=0x0, err_enable=0xFF, mgmt_event=0x10 System bridge dump: Bridge 0, for PA Bay 0 (I/O Card, PCMCIA, Interfaces), Handle=0 DEC21150 bridge chip, config=0x0 (0x00):dev, vendor id = 0x00231011 (0x04):status, command = 0x02B00147 (0x08):class code, revid = 0x06040006 (0x0C):hdr, lat timer, cls = 0x00012E10 (0x18):sec lat,cls & bus no = 0x18111000 (0x1C):sec status, io base = 0x22A03101 Received Master Abort on secondary bus (0x20):mem base & limit = 0x48704000 (0x24):prefetch membase/lim = 0x0001FF01 (0x30):io base/lim upper16 = 0x00010001 (0x3C):bridge ctrl = 0x00030000 (0x40):arb/serr, chip ctrl = 0x02000000 (0x64):serr disable, gpio = 0xF0000000 (0x68):sec clk ctrl,serrsta = 0x000001FF Sturgeon LDT Bridge 0, for PA bay 1, 3 and 5, handle=1 AP1011 bridge, config=0x0 (0x00):dev, vendor id = 0x001014D9 (0x04):status, command = 0x00100107 (0x08):class code, revid = 0x06040000 (0x0C):hdr, lat timer, cls = 0x00010010 (0x18):bus id registers = 0x18090403 (0x1C):secondary status = 0x00A09141 (0x20):mem base/limit = 0x4AF04880 (0x30):io upper limit/base = 0x00010001 (0x34):capabilities ptr = 0x00000040 (0x38):expansion rom bar = 0x00000000 (0x3C):bridge ctrl = 0x00230000 (0x40):LDT cmd, cap id, = 0x00210008 (0x44):Link config/control 0 = 0x00000020 (0x48):Link config/control 1 = 0x00000020 (0x4C):LDT revision id = 0x00000011 (0x60):PCI control, read = 0x2F000327 (0x64):Error control = 0x00008080 (0x68):LDT error control = 0x00000A49 (0x6C):Tx ctrl, databufalloc = 0x00041515 (0x70):Link impedance ctrl 0 = 0x7D3C0000 (0x74):Link impedance ctrl 1 = 0x94FE0000 (0xC8):Tx buffer count max 0 = 0x00FFFFFF (0xCC):Tx buffer count max 1 = 0x00FFFFFF (0xD4):Debug = 0x03CB089F (0xD8):AP1011 Diagnostics = 0x00000010 (0xDC):Link 0 rx CRC expected = 0x4916E0A0 (0xF0):Link 0 rx CRC received = 0x95412108 (0xF4):Link 1 rx CRC expected = 0xD5614021 (0xF8):Link 1 rx CRC received = 0x122217A5 Sturgeon LDT Bridge 1, for PA bay 2, 4 and 6, handle=2 AP1011 bridge, config=0x0 (0x00):dev, vendor id = 0x001014D9 (0x04):status, command = 0x00100107 (0x08):class code, revid = 0x06040000 (0x0C):hdr, lat timer, cls = 0x00010010 (0x18):bus id registers = 0x180F0A03 (0x1C):secondary status = 0x00A0F1A1 (0x20):mem base/limit = 0x4FF04D00 (0x30):io upper limit/base = 0x00010001 (0x34):capabilities ptr = 0x00000040 (0x38):expansion rom bar = 0x00000000 (0x3C):bridge ctrl = 0x00230000 (0x40):LDT cmd, cap id, = 0x00220008 (0x44):Link config/control 0 = 0x00000020 (0x48):Link config/control 1 = 0x000000C0 (0x4C):LDT revision id = 0x00000011 (0x60):PCI control, read = 0x2F000327 (0x64):Error control = 0x00008080 (0x68):LDT error control = 0x00000A49 (0x6C):Tx ctrl, databufalloc = 0x00041515 (0x70):Link impedance ctrl 0 = 0x94FE0000 (0x74):Link impedance ctrl 1 = 0x07C00000 (0xC8):Tx buffer count max 0 = 0x00FFFFFF (0xCC):Tx buffer count max 1 = 0x00FFFFFF (0xD4):Debug = 0x03CB089F (0xD8):AP1011 Diagnostics = 0x00000010 (0xDC):Link 0 rx CRC expected = 0x6956E432 (0xF0):Link 0 rx CRC received = 0xDC3BEAD4 (0xF4):Link 1 rx CRC expected = 0x82E4A580 (0xF8):Link 1 rx CRC received = 0xC552AAE2 PA bridge dump: Unexpected exception, CPU signal 10, PC = 0x0 -Traceback= 0 60522B24 60522A28 60521374 60505F30 605F6A0C 606664E0 605FB450 $0 : 00000000, AT : 60EF0000, v0 : 00000000, v1 : 00000040 a0 : 61074BF8, a1 : FFFFFFFF, a2 : 61074B84, a3 : FFFFFFFF t0 : 00000000, t1 : 00000000, t2 : 00000000, t3 : 00000000 t4 : 605FB510, t5 : 00000000, t6 : 08000000, t7 : 00000000 s0 : 61074AD0, s1 : 61074BF8, s2 : 61074B84, s3 : 00000000 s4 : 00000000, s5 : FFFFFFFF, s6 : 7FFFFFFF, s7 : FFFFFFFD t8 : 00000000, t9 : 00000001, k0 : 00000020, k1 : 00000000 gp : 60EF2C40, sp : 61074AA8, s8 : FFFFFFFF, ra : 60522B24 EPC : 00000000, ErrorEPC : BFC01B50, SREG : 34008003 MDLO : 00000000, MDHI : 0000000C, BadVaddr : 00000000 Cause 00000008 (Code 0x2): TLB (load or instruction fetch) exception Unexpected exception, CPU signal 10, PC = 0x0 -Traceback= 0 60522B24 60522A28 60521374 60525BA0 605F6624 605F5CE0 605F5E4C 60602FA4 6060216C 60602F88 6060216C 605F9650 $0 : 00000000, AT : 00000008, v0 : 00000000, v1 : 00000040 a0 : 60EA7F30, a1 : FFFFFFFF, a2 : 60EA7EBC, a3 : FFFFFFFF t0 : 00000000, t1 : 00000000, t2 : 00000000, t3 : 00000000 t4 : 00000000, t5 : 00000000, t6 : 0000000C, t7 : 00000000 s0 : 60EA7E08, s1 : 60EA7F30, s2 : 60EA7EBC, s3 : 00000000 s4 : 00000000, s5 : FFFFFFFF, s6 : 7FFFFFFF, s7 : 0000000A t8 : 00000000, t9 : 00000001, k0 : 61019530, k1 : 00000028 gp : 60EF2C40, sp : 60EA7DE0, s8 : FFFFFFFF, ra : 60522B24 EPC : 00000000, ErrorEPC : BFC01B50, SREG : 34008003 MDLO : 00000000, MDHI : 00000008, BadVaddr : 00000000 Cause 00000008 (Code 0x2): TLB (load or instruction fetch) exception Nested write_crashinfo call (2 times) Unexpected exception, CPU signal 10, PC = 0x0 -Traceback= 0 605F5D54 605F5E4C 60602FA4 6060216C 60602F88 6060216C 605F9650 $0 : 00000000, AT : 00000008, v0 : 61000000, v1 : 00000000 a0 : 00000002, a1 : 0000000A, a2 : 00000000, a3 : 0000002D t0 : 00000001, t1 : 00000000, t2 : 00000000, t3 : 00000000 t4 : 60C09178, t5 : 00000008, t6 : 00000000, t7 : 00000000 s0 : 00000008, s1 : 61020000, s2 : 0000000A, s3 : 00000038 s4 : 61020000, s5 : 60EA0000, s6 : 7FFFFFFF, s7 : 0000000A t8 : 00000000, t9 : 00000001, k0 : 61019530, k1 : 00000038 gp : 60EF2C40, sp : 60EA7D10, s8 : FFFFFFFF, ra : 605F5D54 EPC : 00000000, ErrorEPC : BFC01B50, SREG : 34008003 MDLO : 00000000, MDHI : 00000002, BadVaddr : 00000000 Cause 00000008 (Code 0x2): TLB (load or instruction fetch) exception Nested write_crashinfo call (3 times) *** System received a Bus Error exception *** signal= 0xa, code= 0x8, context= 0x6101b6b4 PC = 0x00000000, SP = 0x61074aa8, RA = 0x60522b24 Cause Reg = 0x00000008, Status Reg = 0x34008003 System Bootstrap, Version 12.2(8r)B, RELEASE SOFTWARE (fc1) TAC Support: http://www.cisco.com/tac Copyright (c) 2002 by cisco Systems, Inc. C7200 platform with 1048576 Kbytes of main memory