[c-ubr] uBR-7223 Question
René-Roger Ziesack
reneroger at gmail.com
Wed Mar 26 13:50:33 EDT 2008
Hi Basi,
the depends on some parameters - which bandwidth do you plan per user?
What kind of services do you plan to provide (internet only, voice
services)?
How does you network look like (SNR, ingress)?
In general; what you described is more a minimal configuration without any
redundancy.
cu
rene-roger
2008/3/26, Sarpreet Basi <sar at knowledgecomputers.net>:
>
> Hi,
>
> Doing a little consulting here. We are looking for a CMTS and
> associated hardware/modems to launch high speed internet on our CATV
> system. I would estimate that we will have between 3000-4000 modems in
> use but would also like to have room for expansion. Like to have
> redundancy as well.
>
> Thinking of the following:
>
> uBR7223
> NPE-225
> I/O-FE
> 2x uBR-MC16C
>
> Would this config support 4000+ users?
>
>
> Regards,
>
> Sarpreet Basi
> Knowledge Computers
> Email: sar at knowledgecomputers.net
> Toll-free: 800.967.6609 x102
> International: 250.748.0818 x102
> Fax: 250.748.3388
> Mobile: 250.709.0336
>
> -----------------------------
> AOL IM: sarpreetb
> MSN: sarpreet at hotmail.com
> www.knowledgecomputers.net
>
> _______________________________________________
> cisco-ubr mailing list
> cisco-ubr at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-ubr
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-ubr/attachments/20080326/e2ad30f3/attachment.html
More information about the cisco-ubr
mailing list