[cisco-voip] Restricting CLID.

[Vance Shipley]

Jakub,

Do you want to "set the presentation indicator to Restricted" or do
you want to remove the Calling Party Number IE?  The former will
continue to send the Calling Party Number IE, including the number
of the caller, but will specify that it should not be displayed on
the called party's telephone.  This allows services such as Call
Return to continue to work.

In either case I don't have an answer handy but it something to
consider.

	-Vance

On Wed, Aug 27, 2003 at 12:09:21PM +0200, Jakub Klausa wrote:
}  'lo
}  
}  	Is there any way to set an 'restricted' information for CLIP for an
}  outgoing call from an AS5300? I mean any other then requesting a CLIR fro
}  the whole trunk from the upstream operator. I want to be able to restrict
}  the calling numbers only for some calls.
}  	Is that possible at all? 
}  
}  
}  -- 
}  k.



}  _______________________________________________
}  cisco-voip mailing list
}  cisco-voip at puck.nether.net
}  https://puck.nether.net/mailman/listinfo/cisco-voip