[cisco-voip] What I'm I doing wrong?

[Ryan Ratliff]

What does a 'debug isdn q931' show for an incoming call?

-Ryan
----- Original Message ----- 
From: "Voll, Scott" <Scott.Voll at wesd.org>
To: <cisco-voip at puck.nether.net>
Sent: Wednesday, August 27, 2003 7:07 PM
Subject: [cisco-voip] What I'm I doing wrong?


> I have CM 3.3.3 and a 2621 with a PRI going out to Verizon.  I have 100
> DID's.  I believe everything is configured the way it should.  I can
> dial out via the PRI.  And I can call the other ip phones and the phone
> attached to the PBX via a 3640 PRI connection.  The only problem is I
> can't dial back in the PRI with the DID's  The 2621 is running MGCP.  So
> What I'm I missing that I can't receive calls from the outside via my
> DID's? Any info would be greatly appreciated. 
> 
> Scott Voll
> Network Analyst, CCNA 
> Willamette ESD
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip