[cisco-voip] What I'm I doing wrong?

[Wes Sisk]

can you grab a debug isdn q931 from the router when attempting an inbound
call?
also configure your CCM traces to detailed and then review the newest trace
after placing a call with q931translator.exe on the CCM server.

/Wes

> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Voll, Scott
> Sent: Wednesday, August 27, 2003 7:08 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] What I'm I doing wrong?
>
>
> I have CM 3.3.3 and a 2621 with a PRI going out to Verizon.  I have 100
> DID's.  I believe everything is configured the way it should.  I can
> dial out via the PRI.  And I can call the other ip phones and the phone
> attached to the PBX via a 3640 PRI connection.  The only problem is I
> can't dial back in the PRI with the DID's  The 2621 is running MGCP.  So
> What I'm I missing that I can't receive calls from the outside via my
> DID's? Any info would be greatly appreciated.
>
> Scott Voll
> Network Analyst, CCNA
> Willamette ESD
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip