[cisco-voip] Anyone with experince?

[Ryan Ratliff]

You can configure a route pattern in the CM that contains the access code.
You need to be aware however that the placed calls will show up in the
phone's log with the access code clearly shown.  I imagine it would be
relatively simple to set up a CRS script to allow an access code.  That
would prevent anyone with access to the phone from seeing the access code in
the placed calls list.

-Ryan
----- Original Message ----- 
From: "Voll, Scott" <Scott.Voll at wesd.org>
To: <cisco-voip at puck.nether.net>
Sent: Thursday, August 28, 2003 2:49 PM
Subject: [cisco-voip] Anyone with experince?


> Has anyone set up Call Manager 3.3.3 to only allow long distance via an
access code?  Can it be done?  And can someone point me in the right
direction?
>
> Thanks
>
> Scott Voll
> Network Analyst, CCNA
> Willamette ESD
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip