[cisco-voip] revert SIP firmware to SCCP for 7960 IP phone

[Wes Sisk]

This should do the trick:

http://www.cisco.com/en/US/partner/tech/tk652/tk701/technologies_tech_note09
186a0080094584.shtml

When you specify the SCCP load name, make sure to use
one of the older CCM SCCP loads.  The SIP images
appear to work with the load files that use the 8.3 naming
convention, but do not appear to work with the latest
load files that are signed or use (12?).3 format.

/Wes

> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of
> sekchye at yahoo.com
> Sent: Friday, December 05, 2003 2:24 AM
> To: cisco-voip at puck.nether.net
> Cc: sekchye at yahoo.com
> Subject: [cisco-voip] revert SIP firmware to SCCP for 7960 IP phone
>
>
> Hi there!
>
> 	I would like to find out if a Cisco IP phone 7960
> sccp firmware is changed to SIP, how to revert back to SCCP?
>
> 	Is there a way to revert the firmware from SIP back
> to SCCP without using a Cisco Call manager?
>
> 	Thank you very much for your help!
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip