[cisco-voip] IOS MGCP GW without CCM

[Steve]

Hi,
I was interested if anybody had configured a Cisco IOS MGCP gateway to talk to 
a call agent other then CCM.

What I'm trying to achieve is to have a 2651 with a NM HDV E1 in it connected 
to our PBX.

If I place a call from the PSTN to the Gateway I can see the MGCP events on 
the Cisco router but the call is not forwarded to the E1.

I have tried several different configurations for this, I have used DS0 groups 
and I have tried PRI groups none of which seems to work, there are some 
configuration examples on CCO for Trunk gateways but this implies you need to 
be able to speak ISUP.

If anyone could give me some advice or pointers to documentation I would 
appreciate it.

Thanks in advance...

Regards,

Steven Godfrey
Network Development Manager
==============================================
InTechnology plc - Secure Offsite Data
Head Office:  Nidderdale House, Beckwith Knowle, Harrogate,  HG3 1SA.
www.intechnology.co.uk 

________________________________________________________________________
This message has been checked for all known viruses by the 
CitC Virus Scanning Service powered by SkyLabs. For further information visit
http://www.citc.it

___