[cisco-voip] IOS MGCP GW without CCM

[Voll, Scott]

Steve--

Is there any reason for not using H323?  

What kind of PBX are you running?  We have a Tadiran and it's call
process protocol was not supported by MGCP so we had to make ours an
h323 gateway.

Scott

-----Original Message-----
From: Steve [mailto:sgsubs at intechnology.co.uk] 
Sent: Thursday, December 18, 2003 7:09 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] IOS MGCP GW without CCM

Hi,
I was interested if anybody had configured a Cisco IOS MGCP gateway to
talk to 
a call agent other then CCM.

What I'm trying to achieve is to have a 2651 with a NM HDV E1 in it
connected 
to our PBX.

If I place a call from the PSTN to the Gateway I can see the MGCP events
on 
the Cisco router but the call is not forwarded to the E1.

I have tried several different configurations for this, I have used DS0
groups 
and I have tried PRI groups none of which seems to work, there are some 
configuration examples on CCO for Trunk gateways but this implies you
need to 
be able to speak ISUP.

If anyone could give me some advice or pointers to documentation I would

appreciate it.

Thanks in advance...

Regards,

Steven Godfrey
Network Development Manager
==============================================
InTechnology plc - Secure Offsite Data
Head Office:  Nidderdale House, Beckwith Knowle, Harrogate,  HG3 1SA.
www.intechnology.co.uk 

________________________________________________________________________
This message has been checked for all known viruses by the 
CitC Virus Scanning Service powered by SkyLabs. For further information
visit
http://www.citc.it

___
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip