[cisco-voip] 7200 VXB-2TE1 h323 gateway...

[Wes Sisk]

Sounds like you have your route pattern directly at the gateway
so the gateway is not eligible to be in a routegroup.
To get around it consider something like this:

change your route patter to point at a route list
(this frees the gateway to be added to a route group)

Then configure your gateway to be in the route groups you desire.

/Wes

> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Jeff Behl
> Sent: Monday, July 14, 2003 1:25 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] 7200 VXB-2TE1 h323 gateway...
> 
> 
> i have a 7200 with the above which is currently registered to the cm. 
> what i'd like to do is put each pri port into its own route group then 
> create a route list of the two groups.  is this possible in this 
> situation?  right now putting the gateway by itself into a route group 
> isn't possible as it doesn't show up as a possible addtion when creating 
> one, though I've heard that it won't show up if the gateway is already 
> defined for use in a dial pattern...
> 
> thanks
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-voip