[cisco-voip] 7200 VXB-2TE1 h323 gateway...

[Wes Sisk]

Nope.

To be able to route specific calls to different ports you will
either need to get a bit creative with your dialplan.

Currently you probably have dial-peers with something like 9.T
going out both ports.  Change this so 7.T goes out one port and 9.T goes
out the other port.  Then use the Route Pattern/Route List/Route Group
in /CCMAdmin to strip/prepend the appropriate trunk access code.

/Wes

> -----Original Message-----
> From: Jeff Behl [mailto:jeff at expertcity.com]
> Sent: Monday, July 14, 2003 4:40 PM
> To: Wes Sisk
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] 7200 VXB-2TE1 h323 gateway...
> 
> 
> thanks.  one q remaining:  once I do this will i have the ability to 
> add individual ports on the adaptor (there are two) to different route 
> groups?
> 
> 
> thanks again.
> jeff
> 
> Wes Sisk wrote:
> 
> > Sounds like you have your route pattern directly at the gateway
> > so the gateway is not eligible to be in a routegroup.
> > To get around it consider something like this:
> > 
> > change your route patter to point at a route list
> > (this frees the gateway to be added to a route group)
> > 
> > Then configure your gateway to be in the route groups you desire.
> > 
> > /Wes
> > 
> > 
> >>-----Original Message-----
> >>From: cisco-voip-bounces at puck.nether.net
> >>[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Jeff Behl
> >>Sent: Monday, July 14, 2003 1:25 PM
> >>To: cisco-voip at puck.nether.net
> >>Subject: [cisco-voip] 7200 VXB-2TE1 h323 gateway...
> >>
> >>
> >>i have a 7200 with the above which is currently registered to the cm. 
> >>what i'd like to do is put each pri port into its own route group then 
> >>create a route list of the two groups.  is this possible in this 
> >>situation?  right now putting the gateway by itself into a route group 
> >>isn't possible as it doesn't show up as a possible addtion when 
> creating 
> >>one, though I've heard that it won't show up if the gateway is already 
> >>defined for use in a dial pattern...
> >>
> >>thanks
> >>
> >>_______________________________________________
> >>cisco-voip mailing list
> >>cisco-voip at puck.nether.net
> >>http://puck.nether.net/mailman/listinfo/cisco-voip
> 
>