[cisco-voip] Re: John Keane

[Bryan Deaver]

Check the below url.  In 12.2(15)T, a h323v4 feature was introduced which
seems to allow range destination patterns to be registered with a GK;
assuming the GK supports this functionality as well.

I think this will do what you want.  I will say though I have not yet played
with this functionality and just going by the release-notes.

Bryan


http://www.cisco.com/univercd/cc/td/doc/product/software/ios122/122newft/122
t/122t15/ftgwzpre.htm



-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Németh, Pavol
Sent: Wednesday, July 16, 2003 12:13 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Re: John Keane


Hi there,

you are right, you cannot register a range, only full numbers. But you can
try to use "h323-gateway voip tech-prefix" to register a tech-prefix and
than every call to a number starting with the same numbers as the
tech-prefix can be routed to the gateway.

Cheers,

anomet

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
http://puck.nether.net/mailman/listinfo/cisco-voip