[cisco-voip] Troubleshooting commands

[Marcelo Bartsch]

On Thu, 2003-06-19 at 15:11, Chana Weiss wrote:
Chana,
about commands, which help me a lot was:

debug dialpeer
debug isdn q931 (if you had isdn)
debug voice translations

with those 3 you can get a lot of info on how the VOIP GW is working.


> Hi,
>  
> Im looking for good troubleshooting commands or, tools... Im new to this voip stuff.  any help would be greatly appreciated.
>  
> Thank you.
>  
> -Chana
> 
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Voll, Scott
> Sent: Monday, June 16, 2003 7:32 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Call Manager --Automated Caller
> 
> 
> 
> Hey everyone--
> 
> Does anyone have an Automated caller connected to Call Manager via TAPI or JTAPI?  And what is it?  How well does it work?  Have you had any problems with it?  How easy was it to put in and use?
> 
> 
> Thanks in advance
> 
> Scott Voll
> Network Analyst, CCNA
> Willamette ESD
> scott.voll at wesd.org
>  
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-voip
> 
> 
> ______________________________________________________________________
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> http://puck.nether.net/mailman/listinfo/cisco-voip
-- 
Marcelo Bartsch <mbartsch at unix911.ath.cx>