[cisco-voip] B channel status on MGCP gateway

[Candace Holman]

The CCM MIB is not well developed.  But you can see MGCP Gateway statistics 
in the Performance Monitor, so it should be queryable via Microsoft access 
methods.

PS - If there's only one gateway, you could try querying ccmActivePhones 
MIB variable on the callmanager.

Candace
At 05:10 PM 11/5/2003, Jeff Behl wrote:
>Anyone know  how to get the above via SNMP?  I'm trying to get a count of 
>active calls on a 2650XM with NM-HDV hard.  Querying the actual router 
>doesn't seem to work (i'm assuming this is because the signaling is 
>backhauled) and I can only find D channel status in the CISCO-CCM-MIB when 
>querying the callmanager
>thanks..
>
>jeff
>
>
>:wq
>Jeff Behl
>Network Engineer
>Expertcity
>
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip