[cisco-voip] Caller ID question with CM

[Wes Sisk]

Scott,

You will need to setup external phone number mask on each phone internally
and check "use calling party's external phone number mask" on the 9.@ route
pattern.  Then only calls directly from ipphones will get those prefix
digits.  I believe this can be updated in BAT to simplify your life some :-)

/Wes

> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Voll, Scott
> Sent: Friday, November 14, 2003 1:30 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] Caller ID question with CM
>
>
> List members-
>
> I have a little Caller ID problem, that needs some attention.
>
> I'm using CM 3.3.3 sr1.
>
> The problem is I have set up my Route Pattern of 9.@ with a Calling
> Party Transform Mask of 503385xxxx.  This works great for the internal
> users.  The problem becomes when I have my phone forwarded to my cell.
> Now if someone calls my ip phone, they get forwarded to my cell.  Only
> my cell gets 503-385-xxxx, xxxx being the calling parties last four
> digits, making for a wrong caller id number.
>
> Any help would be great.
>
> Thanks in advance
>
> Scott Voll
> Network Analyst, CCNA
> Willamette ESD
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip