[cisco-voip] Voice call routing with attendant console

[Ryan Ratliff]

Translation pattern should work for you.

503xxx.xxxx  strip pre-dot.

As long as your users are never dialing 503 without a 1 or 91 before it this
should work for you.  If you have a local area code of 503 that users dial
to get outside the voip network then you'll need to get more creative.

-Ryan
----- Original Message ----- 
From: "Voll, Scott" <Scott.Voll at wesd.org>
To: <pacug at patch.com>; <cisco-voip at puck.nether.net>
Sent: Wednesday, October 01, 2003 10:31 AM
Subject: [cisco-voip] Voice call routing with attendant console


> What is my best option?
>
> I have Call Manager using LDAP on my network to get the corporate
> directory.  All users are in the corporate directory as 503-xxx-xxxx but
> call manager only knows about xxxx.  If I setup a route pattern of
> 503xxx.xxxx then I have to set it up to route out a voice GW(and that's
> not going to work)  How can I set this up to route to the 4 digit
> extension?
>
> Scott Voll
> Network Analyst, CCNA
> Willamette ESD
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip