[cisco-voip] IP Phone 7960 firmware

[Candace Holman]

That firmware load is for SCCP protocol.  You can upgrade to SIP or MGCP 
firmware loads, you have to have a customer login at CCO to download the 
firmware.  Basically, for SCCP and SIP you download the firmware to a TFTP 
server and configure the phone settings to use this TFTP server.  I haven't 
tried MGCP.  See the Voice Applications page for a complete list of firmware:

http://www.cisco.com/kobayashi/sw-center/sw-voice.shtml

The MGCP firmware is misfiled on this listing, it's not under IP Phones, 
it's under Voice Application Software.

Candace

At 01:02 PM 10/23/2003, you wrote:
>I have a few Cisco IP Phone 7960s which has firmware versión:
>P00303030202.
>Does anyone know which protocols does this firmware support? (I mean: if
>it runs SCCP, MGCP or SIP).
>Can anyone suggest nice links to understand these phones configuration,
>and the firmware upgrade procedure?
>Thanks,
>
>JP
>
>-----Mensaje original-----
>De: cisco-voip-bounces at puck.nether.net
>[mailto:cisco-voip-bounces at puck.nether.net] En nombre de Ryan Ratliff
>Enviado el: Thursday, October 23, 2003 12:56 PM
>Para: Voll, Scott
>CC: pacug at patch.com; cisco-voip at puck.nether.net
>Asunto: [cisco-voip] Re: [PACUG] Extension Mobility CM 3.3 AD 2k
>
>EM should use the pin, not the password.
>
>-Ryan
>----- Original Message -----
>From: "Voll, Scott" <Scott.Voll at wesd.org>
>To: <cisco-voip at puck.nether.net>; <pacug at patch.com>
>Sent: Thursday, October 23, 2003 11:51 AM
>Subject: [PACUG] Extension Mobility CM 3.3 AD 2k
>
>
> > I have intergraded CM 3.3.3 with AD 2000.  When using Ext. Mobility
>does
> > CM query AD for username and Password or does CM use the PIN (set up
>in
> > CM user) for the password?
> >
> > If it gets both the username and password from AD, is there a way to
> > change that?
> >
> > I think the problem I'm having is that I have policies in place that
> > don't allow me to use just numbers for the password in AD.  Therefore
>EM
> > is not working because I can't put letters and stuff in for a
>Password.
> > If this is the case, how do I work around this?
> >
> > Scott Voll
> > Network Analyst, CCNA
> >
> > _______________________________________________
> > PACUG mailing list
> > PACUG at tire.patch.com
> > http://tire.patch.com/mailman/listinfo/pacug
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip