[cisco-voip] Restricting CLID.

[Hielke Christian Braun]

Jakob,

i am using a rule like this:

!
translation-rule 1
 Rule 1 any null
!

to remove all calling numbers on outgoing calls. Also depending on
the IOS version you run, there might be a clid option in the pots
dial-peer:

xxx-xxxx(config-dial-peer)#clid ?
  network-number  To provide Network Provided Number
  restrict        To restrict presentation of caller ID
  strip           To remove calling party number entirely


It is in 12.3. In earlier versions i think it was invisible.

Regards,
 Christian.



On Wed, Aug 27, 2003 at 12:40:08PM +0200, Jakub Klausa wrote:
> On Wed, Aug 27, 2003 at 06:28:53AM -0400, Vance Shipley wrote:
> => Jakub,
> => 
> => Do you want to "set the presentation indicator to Restricted" or do
> => you want to remove the Calling Party Number IE?  The former will
> => continue to send the Calling Party Number IE, including the number
> => of the caller, but will specify that it should not be displayed on
> => the called party's telephone.  This allows services such as Call
> => Return to continue to work.
> => 
> => In either case I don't have an answer handy but it something to
> => consider.
> => 
> => 	-Vance
> 
> I'd rather have the secound one, ie not sending anything in the CPA number IE,
> but setting the restricted indicator would be also very nice.
> 
> The only way i somehow thought of doing the former is to do some tricky
> translation-rule, but despite my problems with the translation-rules logic
> and grammar earlier, i don't know how to make it to leave the rewritten
> field empty.
> 
> Any sugguestions?
> 
> -- 
> k.



> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip