[cisco-voip] simple q

[Wes Sisk]

Use a translation pattern to trasnform 1000 to 2000 and use
the correct CSS and partitions.

/Wes

> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net
> [mailto:cisco-voip-bounces at puck.nether.net]On Behalf Of Jeff Behl
> Sent: Tuesday, September 23, 2003 3:07 PM
> To: cisco-voip at puck.nether.net
> Subject: [cisco-voip] simple q
>
>
> A branch office has a 2651XM w/PRI as their voicegw, controlled by a cm
> 3.3 machine via MGCP.  I think i'm doing this the wrong way...
>
> Their old analog line is going away but the Telco has agreed to route
> the old 4 digit extension down the PRI (they already have a new number
> which is being handled by the CM).  what's the easiest way to force the
> new DN to go to an existing DN?  I tried creating a simple route pattern
> with the old analog 4 digit DN as the pattern that has a Called Party
> Transform mask of the DN i want the call to go to, but this results in a
> fast busy.  I would rather not just make this another line on their phone.
>
> tia
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip