[cisco-voip] Cisco CallManager shared line q.

[Walenta, Phil]

Hunt groups in 4.0 have a "group ring" function that allows a single number to ring multiple phones, each with different numbers.  This is your eventual solution.  There is no other way in 3.3 or earlier to accomplish this.

________________________________

From: cisco-voip-bounces at puck.nether.net on behalf of Voll, Scott
Sent: Fri 4/9/2004 8:34 AM
To: snoop at itl.ua; cisco-voip at puck.nether.net
Subject: RE: [cisco-voip] Cisco CallManager shared line q.



What version of CM are you using?

In 3.3 I think your only option is a shared line, with each phone having
the same number or put them in a Hunt Group and only one rings at a
time, but will ring all eventually.

4.0 might have some other options.

Scott

-----Original Message-----
From: Alex Kasatkin [mailto:snoop at linkbeat.net]
Sent: Friday, April 09, 2004 5:16 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Cisco CallManager shared line q.

Hi all,

        Does anyone know how to create shared line on two or more
devices registred with my CM ? For example when call
routed to directory number 1111 two or more devices ringing, and each
device have own directory number at the same time.

regards.

--
S.N.O.O.P.: Synthetic Networked Organism Optimized for Peacekeeping
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip